• IEEE 802.3af Power over Ethernet (PoE) standard
• 8 x 10/100/1000Mbps Auto-Negotiation and Auto-MDIX Gigabit Power over
Ethernet RJ45 ports
• Supports PoE power maximum 15.4 watts for each PoE port
• 7-Segment LEDs for individual port status: PoE class, maximum power allocation
• 7-Segment LEDs for system planning: display total balanced system power
• Full wire-speed non-blocking reception and transmission
• Store and forward switching method
• 144kbytes RAM data buffer and 8K entries MAC address table
• IEEE 802.3x flow control for full-duplex mode; back pressure flow control
for half-duplex mode
• Supports integrated address look-up engine, automatic address learning
and address aging
• Supports IEEE 802.1Q Tag-VLAN, IEEE 802.1D Spanning Tree, IEEE 802.1w
RSTP, and IEEE802.1x (MD5)
• Supports Port-Mirroring and IGMP Multicast functions
• Supports Multicast Storm, Broadcast Storm and Flood control
• Supports QoS on IEEE 802.1p, DSCP for IPv4 and IPv6
• Supports Link Aggregation IEEE 802.3ad and fail over
• Supports Jumbo Frame in all speeds (up to 9kbytes packet frame size)
• Extensive diagnostic LED´s on the front panel
• 3-year limited warranty
| Hardware | |
| Standard |
|
| Ports | 8 x 10/100Mbps Auto-MDIX PoE ports |
| Power Switch | On/Off power switch |
| Data Transfer Rate |
|
| Data RAM Buffer | 512Kbits |
| Address Table | 1K MAC entries |
| Switch Fabric | 1.6Gbps |
| Power | 100~240VAC 50/60Hz, internal universal switching power |
| Diagnostic LEDs | Power, Link/Activity, PoE Act/Status |
| Power Consumption | 6 Watts max. (no Power Device (PD) connected) 132 Watts max. (8 x 15.4 watts PoE devices connected) |
| Temperature |
|
| Humidity | 10%- 95% (non-condensing) |
| Dimensions | 266 x 160 x 44 mm (10.5 x 6.3 x 1.73 in.) |
| Weight | 1.4 kg (3.1 lb) |
| Certifications | CE, FCC |
| PoE | |
| Power over Ethernet | Up to 15.4 watts per port; PD classification Polymer switch for short protection PoE: pin 3,6 for power+ and pin 1,2 for power |
