• Wi-Fi Compliant with 2.4GHz 802.11 b/g & 5GHz 802.11a Devices for
extending wireless networks.
• N-Type Male to N-Type Female Connector.
• Optimal placement of your existing Wi-Fi Device permits you to maximize
its wireless performance.
• Flexible outer conductor allows the tightest bend radius available for
any cable of similar size and performance.
• Provides flexible Low-loss communication for wireless antenna.
• 50dB RF Shielding is 10 dB greater than typical single shielded coax
(40 dB).
• Multiply bonded outer foil conductor is rated conservatively at >
90 dB.
• Weatherproof cable design for outdoors exposure with best materials for
UV resistance.
• Polyethylene jacketed cable designed for outdoor use.
• Easy and quick deployment into a WLAN environment.
| Construction | |
| Inner Conductor (BCCAI) | 0.108 in. (2.74 mm) |
| Dielectric (Foam PE) | 0.285 in. (7.24 mm) |
| Outer Conductor (Aluminum Tape) | 0.291 in. (7.39 mm) |
| Over Braid (Tinned Copper) | 0.320 in. (8.13 mm) |
| Jacket (PE) | 0.405 in. (10.29mm) |
| Mechanical | |
| Bend Radius: Installation | 1.0 in. (25.4mm) |
| Bend Radius: Repeated | 4.0 in. (101.6 mm) |
| Bending Moment | 0.5 ft-lb (0.68 N-m) |
| Weight | 0.068 lb/ft (0.10 kg/m) |
| Tensile Strength | 160 lb (72.6 kg) |
| Flat Plate Crush | 40 lb/in. (0.71 kg/mm) |
| Environment | |
| Temperature | Operating: -40° C ~ 85°C (-40°F~185°F) Storage: -70° C ~ 85°C (-94°F~185°F) |
| Cable Weight | |
| TEW-L406 | 550g (1.21lb) |
| Electrical | |
| Cut-off Frequency | 16.2 GHz |
| Velocity of Propagation | 85% |
| Dielectric Constant | 1.38 |
| Time Delay | 1.20 nS/ft (3.92 nS/m) |
| Impedance | 50 ohms |
| Capacitance | 23.9 pF/ft (78.4 pF/m) |
| Inductance | 0.060 uH/ft (0.20 uH/m) |
| Shielding Effectiveness | > 90 dB |
| DC Resistance Inner Conductor Outer Conductor | 1.39 ohms/1000ft (4.6 ohms/km) 1.65 ohms/1000ft (5.4 ohms/km) |
| Voltage Withstand | 2500 Volts DC |
| Jacket Spark | 8000 Volts RMS |
| Peak Power | 16 kW |
