Skip to Store Area:

TRENDnet LOGO

More Views

16-Port 10/100Mbps PoE Switch

TPE-S160

Brochure Downloads
Downloads
Email to a Friend

Be the first to review this product

Availability: In Stock.

RRP:  $629.95 (inc GST)
Add Items to Cart Add to Cart

Quick Overview

The 16-Port 10/100Mbps PoE Switch, model TPE-S160, reduces equipment and installation costs by delivering data and power over existing Ethernet cables to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras.

Boost office efficiency and reduce network congestion with a total switching capacity of 3.2Gbps.

LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts to each PoE port. A convenient on/off button is located on the back of the switch.

Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices.

Use TRENDnet's PoE Splitter to install non-PoE devices in remote locations.

• 16 x 10/100Mbps Auto-MDIX RJ-45 PoE portsOn/off power switch
• IEEE 802.3af Power over Ethernet (PoE) compliant
• Supports PoE Powered Device (PD) classification
• Provides 15.4 watts per PoE port
• 3.2Gbps switching fabric
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 1.5Mbits RAM Data Buffer
• 4K MAC address entries
• Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
• Plug and Play
• Sturdy 19” wide metal enclosure
• Rack mounting hardware included
• 3-year limited warranty

Hardware
Standard
  • IEEE 802.3 10Base-T
  • IEEE802.3u 100Base-TX
  • IEEE 802.3af Power over Ethernet
  • IEEE 802.3x Flow Control
Ports 16 x 10/100Mbps Auto-MDIX PoE ports
Power Switch On/Off power switch
Data Transfer Rate
  • Ethernet: 10/20Mbps (half/full duplex)
  • Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer 1.5Mbits
Address Table 4K MAC entries
Switch Fabric 3.2Gbps
Power 100~240VAC 50/60Hz, internal universal switching power
Diagnostic LEDs Power, Link/Activity, PoE Act/Status
Power Consumption 6 Watts max. (no Power Device (PD) connected)
260 Watts max. (16 PoE devices connected)
Temperature
  • Operating: 0° ~ 45°C (32° ~ 113°F)
  • Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity Max. 95% (non-condensing)
Dimensions 440 x 220 x 44 mm (17.3 x 8.7 x 1.7 in.)
Weight 3.1 kg (6.9 lbs.)
Certifications CE, FCC
PoE
Power over Ethernet Up to 15.4 watts per port; PD classification
Polymer switch for short protection
PoE: pin 3,6 for power+ and pin 1,2 for power-