Menu
Cart 0

N300 2.4GHz 10 dBi PoE Outdoor Access Point Bridge Kit

Trendnet

  • $381.15


TEW-740APBO2K | N300 10 dBi Wireless Outdoor PoE Preconfigured Point-to-Point Bridge Kit - TRENDnet

Average ETA for Additional Units  Contact Us
Product Datasheet Download

The TRENDnet TEW-740APBO2K 10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit provides Wireless N300 point-to-point connectivity. This preconfigured kit provides installers the simplest way to create a long distance wireless point-to-point bridge.

Conveniently link two locations together with wireless N speed and performance.A variety of installation scenarios are facilitated with Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP (CAP) modes. The IPX6 rated housing comes with wall and pole mounting hardware.

TEW-740APBO N300 2.4GHz 10dBi High Power Outdoor PoE Access Point IPX6 Rated

Featuring Wireless N300 point-to-point networking bridge (2.4 GHz) and durable enclosure with an IPX6 outdoor weather rating. The TEW-740APBO supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP (CAP) modes.

  • 2 x preconfigured Wireless N access points
  • Wireless N300 point-to-point networking (2.4 GHz)
  • Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP (CAP) modes
  • IPX6 outdoor weather rated housing
  • Built-in 10 dBi directional antenna
Standards
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1Q
  • IEEE 802.1X
  • IEEE 802.11d
  • IEEE 802.11e
  • IEEE 802.11f
  • IEEE 802.11h
  • IEEE 802.11i
  • IEEE 802.11b
  • IEEE 802.11g
  • IEEE 802.11n (2.4 GHz up to 300 Mbps)
  • IEEE 802.11r
  • IEEE 802.11k
Hardware Interface
  • 1 x 10/100 Mbps LAN1 port (proprietary PoE max. cable length 60 m (197 ft.))
  • 1 x 10/100 Mbps LAN2 port
  • LED indicators
  • Reset button
  • Grounding Point
Special Features
  • IPX6 weather rated
  • 802.1Q VLAN assignment per SSID
  • Schedule radio on/off time policy
  • 802.11r / 802.11k fast roaming
  • Preconfigured point-to-point bridge kit
Access Control
  • Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-Enterprise, 802.1X
  • Firewall (CPE Mode): NAT, Virtual Server, DMZ Host, PPTP/L2TP/IPsec VPN Passthrough
  • Access Controls: MAC, IP Filter, Layer 2 Client Isolation, Per-SSID client limiting
  • 802.1Q VLAN
  • Authentication 2.0 / Walled Garden for guest authentication
  • Customizable captive portal for guest authentication
  • WMM
Operation Modes
  • Access Point (AP)
  • Access Point (AP) + WDS
  • Wireless Distribution System (WDS)
  • WISP (CPE) + AP
  • Client Bridge + AP
  • Router
  • Control AP (CAP)
SSID
  • Up to 7 SSIDs
Internet Connection Types (WISP (CPE) + AP & Router modes)
  • Dynamic IP (DHCP)
  • Static IP (Fixed)
  • PPPoE (Dynamic IP/Static IP)
  • PPTP (Dynamic IP/Static IP)
Management/Monitoring
  • Local/remote web based management (HTTP, HTTPS)
  • Local/remote CLI based management (Telnet, SSH)
  • SNMP v2c/v3
  • SNMP Trap
  • Upgrade firmware
  • Backup/restore configuration
  • Event logging
  • Authentication log
  • Reboot
  • Restore to factory defaults
  • Ping test
  • Traceroute
  • LED Control
Frequency
  • FCC: 2.412 - 2.462 GHz
  • ETSI: 2.412 – 2.472 GHz
  • IC: 2.412 - 2.462 GHz
Wireless Channels
  • FCC: 1-11
  • ETSI: 1-13
Modulation
  • 802.11b: DBPK, DQPSK, CCK with DSSS
  • 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
Media Access Protocol
  • CSMA/CA with ACK
Antenna Gain
  • 10 dBi internal sector antenna
Wireless Output Power/Receiving Sensitivity
  • 802.11b: FCC/ETSI: FCC: 28 dBm (max.), ETSI: 10.4 dBm (max.), IC: 28 dBm (max.)/-88 dBm (typical) @ 11 Mbps
  • 802.11g: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.5 dBm (max.), IC: 26 dBm (max.)/- 74 dBm (typical) @ 54 Mbps
  • 802.11n: FCC/ETSI: FCC: 26 dBm (max.), ETSI: 10.6 dBm (max.), IC: 26 dBm (max.)/- 69 dBm (typical) @ 300 Mbps
Power
  • Input: 100 – 220 V, 50 - 60 Hz, 0.5 A
  • Output: 12V / 1A
  • Consumption: 13.5 Watts Max.
Operating Temperature
  • -20 - 60° C (-4 - 140° F)
Operating Humidity
  • Max. 99 % non-condensing
Certifications
  • CE
  • FCC
Dimensions
  • 195 x 118 x 61 mm (7.6 x 4.6 x 2.4 in.) per access point
Weight
  • 320 g (0.7 lbs.) per access point
Warranty
  • 3 year

 

Speed and Distance References
Please note that the following information concerning potential connection distances and speeds are for reference only. They are referenced from clear line of sight installations with no other potential sources of signal degradation. Every installation environment is unique. TRENDnet is not responsible for performance metrics that may vary from those referenced below.

When networked to the same unit, this unit is rated for connecting over clear line-of-sight distances of up to 8 km (5 miles). Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna alignment, receiving sensitivity, and radio interference. For optimal results, we recommended that you consult a professional installer for site survey, safety precautions, and proper installation.

Part Number Product Description
TEW-740APBO2K N300 2.4GHz 10 dBi PoE Outdoor Access Point Bridge Kit

We Also Recommend